摇架压力分配对细纱质量和能耗的影响 - 各期目次 - 中国纺织器材信息网

秒速赛车开奖

摇架压力分配对细纱质量和能耗的影响
2019-07-16 11:37:22   来源:   评论:0 点击:

为合理分配细纱平面牵伸摇架前、中、后区压力,分析摇架压力与成纱质量、机件磨损和能耗关系,以纺T R 65 35 18 5 tex纱为例,对比不同摇架压力配置的成纱条干指标。结果表明:细纱摇架前、
吉宜军1,范正春1,邹小祥2
(1.南通双弘纺织秒速赛车,江苏 海安  226661;2.无锡市兰翔胶业秒速赛车,江苏 无锡  214171)
 
摘要:为合理分配细纱平面牵伸摇架前、中、后区压力,分析摇架压力与成纱质量、机件磨损和能耗关系,以纺T/R 65/35 18.5 tex纱为例,对比不同摇架压力配置的成纱条干指标。结果表明:细纱摇架前、中、后3档压力配比为1∶1.23∶1时,成纱条干指标较好;当摇架前、中、后3档胶辊压力由153 N/双锭×115 N/双锭×130 N/双锭调整为110 N/双锭×135 N/双锭×110 N/双锭后,主机吨纱电耗降低18 kW·h;在轻加压条件下,适当加大摇架中区压力,合理分配3档压力,达到提升成纱质量、降低能耗、减缓机件磨损的新理念需要长期的实践验证。
关键词:摇架;3档压力;中区;压力配置;条干;能耗
中图分类号:TS103.82     文献标志码:B      文章编号:1001-9634(2019)02-0031-09
 
收稿日期:2018-07-22
作者简介:吉宜军(1966—),男,江苏海安人,高级工程师,主要从事纺纱技术研究、产品开发和生产管理方面的工作。
网络出版时间:2018-08-27 09:16
http://www.cnki.net/kcms/detail/61.1131.TS.20180827.0916.008.html
 
Influence of Cradle Pressure Distribution on Yarn Quality and Energy Consumption
JI Yijun1,FAN Zhengchun1,ZOU Xiaoxiang2
(1.Nantong Double Great Textile Co.,Ltd.,Hai’an 226661,China;2.Wuxi City Lanxiang Plastic Co.,Ltd.,Wuxi 214171,China)
 
Abstract:In order to wisely release the pressures in front,middle and rear zones of the spinning plane draft cradle,analysis is done to the relationship between the pressure of cradle and yarn quality,parts wear and energy consumption.Taking the yarn T/R 65/35 18.5 tex as an example,the yarn evenness index of different configurations of the cradle pressure are compared.The results show that the yarn evenness index is better when the pressure continued proportion of front,middle and rear zone of the spinning cradle is 1∶1.23∶1.When the cots pressure of front,middle and rear is adjusted from 153 N/double spindles×115 N/double spindles×130 N/double spindles to 110 N/double spindles×135 N/double spindles×110 N/double spindles, which can reduce the power consumption of the main frame by 18 kW·h per ton of yarn.Under the condition of light pressure,there is a long way to go for better yarn quality,less energy consumption and wear of machine parts in production verification for the new idea of properly increasing the pressure in the middle zone of the cradle and rationally releasing the pressure of three-zones.
Key Words:cradle;pressure of three-zones;middle zone;pressure configuration; evenness;energy consumption
 
参考文献:
[1] 唐文辉.SCP2系列气缸加压摇架的性能及结构创新[J].纺织器材,2017,44(1):62-66.
[2] 唐文辉.牵伸加压摇架的结构分析与使用[M].北京:中国纺织出版社,2009.
[3] 陈洪奎.气加压摇架的调节和管理[J].纺织器材,2015,42(6):41-43.


http://www.baogutai.com/uploadfile/2019/1008/20191008061256449.pdf

相关热词搜索:

上一篇:新型胶辊轴承和铝衬管胶辊在转杯纺纱机上的应用
下一篇:秒速赛车开奖梳棉机用针布的维护保养

分享到: 收藏
 秒速赛车官网投注 秒速赛车官网 智慧彩票投注 贵州快3 亚洲彩票 北京赛车历史开奖直播 上海11选5 秒速赛车官网 北京赛车历史开奖直播 北京赛车官网投注平台